Climatic Water Rain Ingress IP Waterproof Test Equipment Model LIB R-1200
Description of IP Waterproof Test Equipment
IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.Unit is placed in its normal operating position.
IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions -tilted 15 degrees in each direction from normal operating position.
Rain/Spray Test Chambers applied to test the shell’s waterproof effect of electronics, automobile and communication, using rainfall simulation to test the product’s waterproof performance and assess the product’s waterproof performance’s loss classification.
Our water ingress chambers have capabilities for IP testing included:
IP X1/X2 (drip test)
IP X3/X4 (spray test)
IP X5/X6 (jet tube test)
IPXX7/X8 (immersion test)
IP X9K (high pressure jet test)
Main Technical Parameter of IP Waterproof Test Equipment
| Model | RD-800 | RD-1200 |
| Internal dimensions (mm) | 800*800*800 | 1200*1200*1200 |
| Overall dimensions (mm) | 1020*1360*1560 | 1450*1450*2000 |
| Oscillating tube radius | 400mm | 600mm |
| Spraying hole diameter | φ0.4mm |
| Hole spacing | 50 mm |
| Swing angle of oscillating tube | 0 to ±180° ( adjustable) |
| Turntable rotation speed | 1r/min, or steeples speed regulating (optional) |
| Controller | Programmable color display touch screen controller, PC Link with software, R-232 interface |
| Water pressure control | Flow meter |
| Observation window | Large viewing window with wiper |
| Water supply system | Storage water tank, booster pump, Automatic water supply, Water purification system, Water saving |
| Safety protection device | Electric leakage, short circuit, motor overheating, over-current protection |
| Exterior material | Steel Plate with protective coating |
| Interior material | SUS304 stainless steel |
| Power | AC380V 50HZ |
| Standard | IEC 60529 |
Key Features of IP Waterproof Test Equipment
Protection against drip, spraying and splashing water
IPX1, IPX2, IP X3 and IP X4 tests can be performed.
Oscillating tube and drip tray.
Programmable color display touch screen controller
Automatic water supply
Large viewing window with wiper
Test chamber internal illumination
IEC60529 standard
Design and Construction of IP Waterproof Test Equipment
Test Area
Test area is made of stainless-steel.
Test chamber internal illumination.
Test specimen is placed and fixed on turntable.
Turntable rotation speed is 1r/min, which can be adjustable. | Oscillating Tube Oscillating tube range can be reached to ±45°, ±60°, ±90°, ±180° Diameter of spraying hole is φ0.4mm. Hole spacing is 50 mm
|
| Drip Tray IPX1 IPX2 drip nozzle diameter is φ0.4mm. Nozzle spacing is 20mm. Water flow can be set on controller. | Water Supply Automatic water supply Water purification system Build in 86L water reservoir to ensure adequate water supply |
| Control Panel Programmable color display touch screen controller Program: 99 groups in 99 sections RS-232 / RS-485 interface PC Link
| Safety Protection Over temperature protection, Water shortage protection Over current protection Earth leakage protection |
Production & Commisioning
1.Check Specification,Prepare& Check Raw Material
2.Sheet Metal Production
3.Coating
4.Assembly
5.Finished Product
6.Commissioning
7.Testing
More products welcome to consult
Our main products included temperature and climate test chambers, corrosion chambers, weathering testers, IP dust and rain chambers, ozone test chamber, noxious gas SO2 H2S chamber, walk-in chambers.
Are you ready to buy a test equipment? Let your products have a better market!
Product Tags:
|
|
Model LIB R-1200 Water Ingress Testing Equipment / Waterproof Test Equipment Images
|
